Description

IN STORE PICKUP ONLY

New Anthem MDX Series are the first distribution systems to feature fully powered independent-zone subwoofer connections, as well as ARC® Genesis room correction for each zone. MDX Series features today’s cutting-edge Anthem amplifier technology so you can expect smooth, efficient, consistent high power and reliability. MDX Series is engineered to simplify your next custom audio system installation, and to blow your clients away with extreme performance in any setup.

Web-Based Setup

Nothing could be simpler than on-site configuration and calibration using our intuitive Web-based controls. The specially designed, adaptive user interface works on any device. Custom configure zones, from input assignments to zone names. Adjust levels (and every aspect of performance) independently.

Automation Compatibility

Robust IP RS-232 connection capability ensures compatibility with leading home automation systems, with easily downloaded drivers.

Drivers available for these systems:

Digital Inputs, Digital Switching

Fast, efficient Ultra-Class-D amplification is supported by proprietary Advanced Load Monitoring technology, delivering reliable performance under even the most demanding loads. Our high-efficiency design meets and exceeds global power-saving standards. Smooth, instantaneous digital switching output allows the linking of digital inputs between multiple amplifiers and analog pass-through connections allow daisy-chaining of multiple MDX units.

Dedicated Subwoofers For Each Zone

Install and control subwoofers independently in separate zones, with dedicated outputs (both low and high level, including bridge mode), and zone-independent settings for the new, more advanced Anthem Room Correction (ARC® Genesis). Toggle ARC Genesis on off in each zone to hear the benefits of premium room optimization.

Zone Configuration Options

Zones can have custom names, multiple inputs, independent playback, and tuning controls. Bridge zones for more power. Enable subwoofer bass management in any zone, instantly set crossover frequency, level, phase, and polarity.

Only the MDX Series gives you this much control over multiple zones, supporting more creative system designs and more thrilling audio performance.

Analog Digital Matrix Switching

Full digital analog matrix switching allows you to assign any analog RCA, digital coaxial or digital optical input to any output, either pre-configured via the web interface or switched in real-time via IP commands.

MDX Includes These Key Features And More…

• 60 Watts (8 Ohms) 120 Watts (4 Ohms) with all channels driven, or bridges to provide 200 Watts (8 Ohms).
• 8- or 16-channels of Ultra-Class-D amplification, each supported by Advanced Load Monitoring technology, delivers fast, reliable performance even under the most demanding loads.
• 24-bit 192kHz digital-to-analog converter (DAC) maintains the integrity of high-resolution source materials.
• Customized pre-set DSP settings.
• Separate zone-specific bass management and subwoofer integration via a passive (RCA) or active (powered by another zone in bridge mode) connection.
• Bridging allows up to 200 Watts for high power applications such as subwoofers.
• • Digital switching output allows linking of digital inputs between multiple MDX.
  • Analog pass-through connections allow daisy chaining of multiple MDX.
  • Speaker terminal block connections accept up to 12 AWG, ideal for long speaker cable runs.
  • IP RS232 capability ensures compatibility with leading home automation systems.
  • ON OFF switched via IP RS232, 12-Volt trigger, or audio sensing.
  • High-efficiency design meets global power saving standards. Secure professional rack-mount arms included.

  • Channels Zones		16 channels Up to 8 zones
    Power Output RMS per Channel (8 Ohm)		60 Watts
    Power Output RMS per Channel (4 Ohm)		120 Watts
    High Output Mode (Bridged) RMS per Channel (8 Ohm)		200 Watts
    Frequency Response		10Hz – 20kHz ±0.5dB
    Digital-to-Analog Converter		PCM up to 24 bit 192 kHz
    Inputs (analog)		8x RCA pairs (left right)
    Inputs (analog)		8x RCA pairs (left right)
    Inputs (digital S PDIF)		2x RCA coaxial; 2x optical (Toslink)
    Inputs (network)		RJ-45 10Base-T 100 Base-TX ethernet port
    Inputs (trigger)		1x 3.5mm (5 – 24V DC AC)
    Inputs (other)		Micro-USB (for ARC); RS-232
    Outputs (speaker level)		8x removable Phoenix style (left right) accommodate wire up to 12AWG
    Output (analog, passthrough)		2x RCA pair (left right)
    Outputs (subwoofer)		8x RCA (with bass management and room correction)
    Outputs (digital matrix)		1x optical (Toslink)
    Outputs (other)		1x 3.5mm 12V trigger
    Audio In-Out Matrix		Yes
    Advanced Load Monitoring		Yes
    Controls (via web-based UI)		Bass level: ±6dB for each zone; Trebel level: ±6dB for each zone; Level balancing: ±10dB for each zone
    Controls (back panel)		Power Mode: Auto, Trigger, External Command; Network Reset (pinhole); Factory Reset (pinhole); Main Power: On Off
    Room Correction		Anthem Room Correction (ARC®)
    Microphone (for room correction)		Included dual input microphone (3.5mm and mini-USB)
    Setup		Web-based user interface
    IP Control (via IP or RS-232)		Drivers for Control4, Crestron, Savant, URC, Elan
    AC Voltage		120V~50 60Hz
    Rack Mount Ears Feet		Included
    Rack Space (feet removed)		2U
    Dimensions (H x W x D, with feet)		3.5” x 17” x 16.4” (8.9 x 43.2 x 41.7 cm)
    Weight		24 lbs. (10.8kg)

    Title	Default Title